Antimicrobial action of photodynamic therapy in root canals using LED curing light, curcumin and carbopol gel.

AIM: To evaluate the capacity of carbopol gel to maintain the intensity of a LED curing light (blueLED) along the length of prepared root canals in bovine teeth, and to assess the antimicrobial capacity of curcumin photoactivated by a LED curing light in the presence of carbopol gel. METHODOLOGY: Experiment 1: Eight straight roots of bovine incisors were standardized to a length of 15 mm, and the root canals instrumented up to a size 120 K-file. The LED curing light was irradiated inside the root canals using an aluminium collimator (1.5 mm in diameter) placed at the orifice (n = 8). Initially, the irradiation was performed in empty root canals and then repeated with the root canals filled with carbopol gel. Simple standardized photographs of the roots were taken with a digital camera in the mesial perspective during the irradiation procedure and the images analysed in OriginLab software to verify the light intensity along the length of the root. Experiment 2: Twenty dentine blocks were obtained from the cervical third of bovine incisors using a trephine bur. Biofilms were induced for 21 days on the blocks using Enterococcus faecalis (ATCC 4083) at 109 cells mL-1 . The blocks were treated according to the groups (n = 5): positive control; standard PDT (methylene blue + diode Laser); curcumin; LED curing light; and curcumin + LED curing light. After the treatment, the samples were dyed with Live/Dead BacLight Bacterial Viability solution and fluorescence images were obtained by Confocal Scanning Laser Microscopy (CSLM). Experiment 3: Thirty-two roots of bovine incisors were prepared as described in experiment 1. Their dentinal tubules were contaminated and the root canals treated according to the groups (n = 8): positive control; standard PDT; curcumin + LED curing light; curcumin + carbopol gel + LED curing light. The specimens were sectioned longitudinally and the split roots were treated with the Live/Dead dye to obtain fluorescence images by CSLM. All images were processed using BioImageL software to measure the percentage of viable bacteria and the data analysed statistically using the nonparametric Kruskal-Wallis test (α < 0.05). RESULTS: In Experiment 1, carbopol gel did not improve the intensity of LED light transmission along the root canal. In Experiment 2, a significant decrease (P < 0.05) in bacterial viability occurred in the following order: positive control < only LED curing light < only curcumin < curcumin + LED curing light = standard PDT; and in Experiment 3 positive control = curcumin + LED curing light ≤ curcumin + gel + LED curing light ≤ standard PDT. CONCLUSION: Similar disinfection effectiveness was obtained using curcumin + LED curing light and methylene blue + 660 nm LASER (standard PDT). The use of carbopol gel did not favour a greater transmission of LED light along the root canal and also resulted in less bacterial killing when used in endodontic PDT.

Mixture of alkaline tetrasodium EDTA with sodium hypochlorite promotes in vitro smear layer removal and organic matter dissolution during biomechanical preparation.

AIM: The aim of this study was to determine the following: (i) the quantity of free chlorine in mixtures of equal proportions of sodium hypochlorite (NaOCl) with trisodium ethylenediaminetetraacetic acid (EDTAHNa3 ) and alkaline tetrasodium ethylenediaminetetraacetic acid (EDTANa4 ); (ii) organic matter dissolution; and (iii) the time necessary to remove the smear layer by these irrigants alone and when mixed. METHODOLOGY: The solutions were mixed in a 1 : 1 ratio and then iodometrically titrated over time to determine the quantity of free available chlorine. The capability of organic matter dissolution by the solutions alone and the mixtures of irrigants was analysed by weighing bovine muscle tissue specimens before and after submission to the following groups (n = 10): G1 - 0.9% saline solution (control), G2 - 2.5% NaOCl, G3 - 17% EDTAHNa3 , G4 - 10% EDTANa4 , G5 - 20% EDTANa4 , G6 - 5% NaOCl + 17% EDTAHNa3 , G7 - 5% NaOCl + 10% EDTANa4 and G8 - 5% NaOCl + 20% EDTANa4 . The times necessary for smear layer removal were determinated on discs of bovine dentine with a standardized smear layer produced with SiC papers using a scanning electron microscope that did not require the samples to be sputter coated. The dentine discs were submitted to the same experimental groups previously described (n = 10) over several time periods, and the photomicrographs acquired were scored for the presence of smear layer. The parametric data of tissue dissolution were analysed using two-way anova and one-way anova with Tukey's post hoc tests (α < 0.05), whilst nonparametric data of smear layer removal were analysed by Friedman test (α < 0.05) and the Kruskal-Wallis test with Dunn's post hoc (α < 0.05). RESULTS: EDTAHNa3 caused an almost complete and immediate loss of free available chlorine from NaOCl, whilst EDTANa4 promoted a slow and concentrat-ion-dependent decline. The organic matter was not dissolved in the control group, EDTA groups or the mixture of NaOCl + 17% EDTAHNa3 group (P > 0.05). NaOCl alone and the associations of NaOCl + EDTANa4 dissolved tissue at all periods analysed (P < 0.05). The smear layer was not removed in the control and NaOCl groups (P > 0.05). The smear layer was removed at 1 min in the NaOCl + 17% EDTAHNa3 group (P < 0.05); 2 min in 17% EDTAHNa3 group (P < 0.05); and 5 min in 10% EDTANa4 , 20% EDTANa4 , 5% NaOCl + 10% EDTANa4 and 5% NaOCl + 20% EDTANa4 groups (P < 0.05). CONCLUSIONS: Alkaline EDTANa4 was slower in removing the smear layer than EDTAHNa3 , but when mixed with NaOCl during biomechanical canal preparation promoted organic matter dissolution and smear layer removal simultaneously. However, the mixing of NaOCl and EDTANa4 should be performed immediately before use to prevent the reduction of free available chlorine.

Effect of finishing instrumentation using NiTi hand files on volume, surface area and uninstrumented surfaces in C-shaped root canal systems.

AIM: To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). METHODOLOGY: Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. RESULTS: Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). CONCLUSIONS: The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation.

Variability of physicochemical properties of an epoxy resin sealer taken from different parts of the same tube.

AIM: To analyse several physicochemical properties of AH Plus (Dentsply DeTrey, Konstanz, Germany), including setting time, flow, radiopacity and the degree of conversion (DC); and to correlate the results with the source of the material: from the beginning, middle or end of the tubes in which they were supplied. METHODOLOGY: Three experimental groups were established for each property investigated. Group 1 corresponded to material taken from the beginning of tubes A and B; Group 2 corresponded to material taken from the middle of each tube; and group 3 corresponded to that from the end of each tube. The setting time, flow and radiopacity were studied according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. DC was determined from infrared spectra, which were recorded at 1-h intervals for the first 6 h; then, at 2-h intervals for the next 14 h; then, at 24 and 30 h. Data were analysed statistically by analysis of variance (anova), Tukey-Kramer, Kruskal-Wallis and Dunn tests, with a significance level of 5%. RESULTS: Group 1 had a significantly longer setting time (2303 ± 1058 min) (P < 0.05). Group 3 had the lowest flowability (30.0 ± 0.7 mm) and the highest radiopacity (14.85 ± 1.8 mm Al) (P < 0.05). No differences were found for the DC test (P > 0.05). CONCLUSION: The results suggest that segregation occurs between the organic and inorganic components of AH Plus sealer, thereby changing the setting time, flow and radiopacity.

Analysis of the gutta-percha filled area in C-shaped mandibular molars obturated with a modified MicroSeal technique.

AIM: To analyse the gutta-percha filled area of C-shaped molar teeth root filled with the modified MicroSeal technique with reference to the radiographic features and the C-shaped canal configuration. METHODOLOGY: Twenty-three mandibular second molar teeth with C-shaped roots were classified according to their radiographic features as: type I--merging, type II--symmetrical and type III--asymmetrical. The canals were root filled using a modified technique of the MicroSeal system. Horizontal sections at intervals of 600 mum were made 1 mm from the apex to the subpulpal floor level. The percentage of gutta-percha area from the apical, middle and coronal levels of the radiographic types was analysed using the Kruskal-Wallis test. Complementary analysis of the C-shaped canal configurations (C1, C2 and C3) determined from cross-sections from the apical third was performed in a similar way. RESULTS: No significant differences were found between the radiographic types in terms of the percentage of gutta-percha area at any level (P > 0.05): apical third, type I: 77.04%, II: 70.48% and III: 77.13%, middle third, type I: 95.72%, II: 93.17%, III: 91.13% and coronal level, type I: 98.30%, II: 98.25%, III: 97.14%. Overall, the percentage of the filling material was lower in the apical third (P < 0.05). No significant differences were found between the C-shaped canal configurations apically; C1: 72.64%, C2: 79.62%, C3: 73.51% (P > 0.05). CONCLUSIONS: The percentage of area filled with gutta-percha was similar in the three radiographic types and canal configuration categories of C-shaped molars. These results show the difficulty of achieving predictable filling of the root canal system when this anatomical variation exists. In general, the apical third was less completely filled.

Determination of pH and calcium ion release provided by pure and calcium hydroxide-containing AHPlus.

AIM: To compare in vitro the pH and calcium ion release provided by pure and calcium hydroxide-containing AHPlus. METHOD: Pure and modified AHPlus, the latter containing 5 and 10% (w/w) calcium hydroxide added during spatulation, were used. The material was spatulated and stored in 10 tubes that were 1 cm long and 1.5 mm in diameter, and then immersed in 20 mL deionized water before the materials had set. Ten tubes with zinc oxide and eugenol were used as controls. Four millilitres of water was removed from the flasks after 24 and 48 h, and after 7, 14 and 30 days, and pH and calcium release were measured with a pH meter and by atomic absorption spectrophotometry, respectively. The results obtained at each time point were compared statistically. RESULTS: A more alkaline pH for AHPlus supplemented with 5 and 10% calcium hydroxide was recorded when compared to pure AHPlus; there were significant differences at 14 and 30 days (P<0.05). The results of calcium ion release showed no significant difference between pure AHPlus and zinc oxide plus eugenol (P>0.05). The comparisons between the AHPlus containing 10% calcium hydroxide with AHPlus containing 5% calcium hydroxide, pure AHPlus, zinc oxide plus eugenol demonstrated significant differences (P<0.05) at all periods. The comparisons between AHPlus containing 5% calcium hydroxide with pure AHPlus and zinc oxide plus eugenol demonstrated significant differences (P<0.05) at all periods of evaluation. CONCLUSIONS: The addition of 5 and 10% calcium hydroxide to AHPlus cement favoured a more alkaline pH and greater calcium ion release.

Three-rooted maxillary second premolar.

The possibility of three canals in maxillary second premolars is quite small; however, it must be taken into account in clinical and radiographic evaluations during endodontic treatment. Many times their presence is noticed only after canal treatment, due to continuing postoperative discomfort. This article describes a clinical case of three-canal maxillary second premolars that are endodontically treated.

The palato-gingival groove. A cause of failure in root canal treatment.

The authors describe a clinical case of a palato-gingival groove on a maxillary central incisor with associated localized periodontal disease and pulp necrosis. The general clinician's initial diagnosis was incorrect; this led to incomplete treatment and subsequent loss of the tooth. Recognition of the palato-gingival groove is critical, especially because of its diagnostic complexity and the problems that may arise if it is not properly interpreted and treated.

[Evaluation of postoperative pain comparing manual and ultrasonic endodontic instrumentation in patients with cleft lip and palate]. / Avaliação da dor pós-operatória comparando-se as técnicas endodônticas de instrumentação manual e a ultrassonoenergizada em pacientes portadores de fissura lábio-palatina.

Our purpose was to compare incidence of post-surgical pain associated to the endodontic therapy where the instrumentation on the root canal was performed by the method of Marshall & Pappin and the method of Marshall & Pappin complemented by the ultrasonic. Seventy patients with only one tooth needing endodontic treatment were treated by one of the methods and, posteriorly, evaluated. The endodontic treatment was performed at one time and from the seventy teeth, thirty have been instrumented by the manual method complemented by the ultrasonic and forty by the manual instrumentation. The patients were clinically controlled after the endodontic treatment was finished during periods of 24, 48 and 72 hours to evaluate their post-surgical condition. The results suggest that were no statistically significant differences (p less than 0.05) in the incidence of pain between the employed methods or according to the pulpar semiologic condition in any of the observed periods. However, we have realized that there was a tendency for a smaller percentage of a postoperative pain in those cases of necropulpectamy treated by the endosonic ultrasonic synergistic system. In those cases of biopulpectomy this has been not observed.

[Clinical evaluation of two tooth bleaching techniques]. / Avaliação clínica de duas técnicas de clareamento dental.

The purpose of this paper was to assess the clinical ability of two bleaching techniques. Patients with at least one darkened teeth caused by mechanical injuries or imperfection in the endodontic therapy were included in this study. The first step was to take an initial photography. After that the teeth were subjected to the bleaching procedures. The techniques employed were proposed by NUTTING & POE or LACERDA et alii. The assessments were made by three trained examiners using the initial and final pictures. The scores were attributed according to the color of the teeth. The data were submitted to the statistical analysis, when was possible to verify that both techniques were equally effective.